Natural Chemistry Phos Floc is the ideal way to clean very cloudy "swamp water" quickly. Phos Floc inexpensively reduces phosphate levels to more manageable levels. One container of Phos Floc will reduce 4000 ppb of phosphates to approximately 600 ppb in 10,000 gallons of pool water. Phos Floc must be vacuumed to waste and removed from pool.
It is a violation of Federal law to use this product in a manner inconsistent with its labeling.
Adjust pool water pH to 7.2 before adding Phos Floc.
Add 4 pounds (one container) Phos Floc to a large bucket of water and mix. (Depending on size of pool and phosphate level, repeat as necessary) If pool has a recirculation (filter bypass) setting, add Phos Floc/water mixture slowly to skimmer and allow water to circulate for 1-2 hours. Must not run through the filter. Turn system off and allow Phos Floc to settle, this may take up to 12 hours. Vacuum sediment to waste (not through the filter). Or If no recirculation (filter bypass) setting is available, add 4 pounds of Phos Floc to a large bucket of water and mix. When filter system is off, broadcast this mixture over the water while walking around the pool. Allow Phos Floc to settle, this may take up to 12 hours. Vacuum sediment to waste (Not through the filter).
Important! It is necessary to further reduce phosphate level to near zero by using PhosFree.
Continue to maintain near zero phosphate levels all season long with Pool Perfect+PHOSfree for easy weekly maintenance. Monitor phosphate levels and keep between 0 - 100 ppb. Normal sanitizer levels will prevent algae growth…guaranteed!